When you make the shift to electronic cigarettes, you can purchase pre-filled e-cig cartridges or refill your cartridges with e-liquid. By making the choice to refill your own electronic cigarette cartridges instead of throwing them away, you can save a fair bit of money. To refill your e-cig cartridges, you will need to either buy E-Liquid or make your own e-liquid with the E-Liq Materials to use to fill the cartridges. All the electronic cigarettes products can be refilled with the E-Liquid actually.
Filling E-Liquid into the cartridge can be tricky if you are doing this for the first time because most are not designed to be reused. This doesn't mean that it's impossible though, if done right then you will be able to smoke your prefered liquid nicotine flavour to your heart's content.
There are generally two ways to do this. The first is the "drip method" and the second is the "injection method".
Materials needed: E-Liquid, Dripper
This method requires that you open up the cartridge and remove the polyester filling inside the cartridge. Then take a dropper and drip a few drops into the cartridge. Gently place the filling back and wait for the liquid to be soaked up by the filling. Add a few more drops to the filling to make sure it is saturated but not so much that the liquid will accumulate at the top. You may need to push the filling and then add more drops multiple times to ensure that it is completely saturated with the liquid nicotine. Close the cartridge. This method takes time and patience because you have to wait for the filling to be completely saturated.
Materials needed: E-Liquid, Syringe or Injector
The best tool to use for refilling electronic cigarette cartridges and to avoid getting e-liquid all over the place is a syringe. By using a syringe with a need, you can disperse the e-liquid evenly along the cartridge filler. A syringe also makes it easier for you to extract e-liquid from a bottle. We have the most complete line of Syringes for all your e-liquid refilling needs with the best prices. We are using all these Syringes for our manufacturing in the Cartridges as well as in the E-Liquid flavorings.
How to Refill E-Cig Cartridges with a Syringe:
Step 1: Take the White Rubber Cap off of the end of the cartridge using tweezer or a small screwdriver.
Step 2: Use your syringe and remove e liquid from your bottle. Then, insert the syringe needle into the middle of your e cig cartridge filler until you are near the bottom of the cartridge. For two-piece Cartomizer, you will want to make sure you avoid damaging the atomizer and insert the syringe needle aiming for the mesh that is inside of the cartomizer tube. Depress your syringe plunger slowly while moving the needle. The goal is to ensure an even fill of your e cig cartridge without overfilling.
Step 3: Replace the Electronic Cigarette cartridge rubber cap.
Step 4: Once the cartridge is filled, cap it for later use or install on your electronic cigarette.
Step 5: Put any left-over e liquid back into your e-liquid bottle. You can also put the cap on the syringe and let it remain in the syringe to top off additional cartridges.
Step 6: Wash your syringe by filling it with fresh water and flushing the syringe several times.
The following video shows you how to refill the E-Liquid in the Cartomizers for E-Cigarette E8 or E-Cigarette E9. Actually you can refill ANY 2-pieces electronic cigarette with such refilling method to save you a lot of money.
The following picture shows you how to refill the cartridges for the EGO, EGO-C, EGO-T and EGO-W models:
Particularly for the EGO-W model, do not inject the e-liquid in the hole at the middle. You should inject the e-liquid in the special hole which is located at the side a shown in the following pictures:
When you inhale and have some burnt smell or less smoke, it is the time to refill or replace your Cartridge or Cartomizer. It is better to refill the Cartridge or Cartomizer about 5-6 times total. After that point, the polyester may begin to be damaged and can cause some damage to the atomizer for working well.